GV350MG GPS Fleet Tracker; 4G LTE Advanced Fleet Tracker


  • LTE CAT-M1 (eMTC), CAT-M2 (NB-IoT)
  • Designed for vehicle monitoring
  • Support a wide variety of external peripherals and I/O options
  • Allows external GPS antenna
  • FCC, Verizon, CE, E-Mark, Anatel, UKCA certified

44 in stock


GV350MG GPS Fleet Tracker; 4G LTE Advanced Fleet Tracker

Buy Mini GPS Fleet Tracker For Vehicle Monitoring 

LTE CAT-Ml (eMTC)/ CAT-M2 (NB-loT) fleet tracker/ tracking devices offering support for a wide variety of external peripherals and 1/0 options; FCC, Verizon, CE, E-Mark, Anatel, UKCA Certified.

GV350MG Tracker

The GV350MG enhances the GV300 based on valuable customer feedback, introducing LTE capability to our proven GV300 2G product. The Customizable CAN interface of the GV350MG caters to the specific protocols needed by customers. This customization has found utility in tractor integration and other specialized scenarios with specific CAN requirements. Heavy trucks supporting J1939 FMS can seamlessly integrate with the GV350MG, along with its array of accessories including dual fuel sensors, Garmin FMI products, cameras, and Queclink’s I/O extenders.

The GV350 series (LTE) includes three models of GNSS tracking devices with multiple interfaces including two RS232  signal ports and a 1-wine interface, etc.  The series supports LTE  CAT-M1  (eMTCV LTE  CAT-M2 (NB-toT} network on multiple bands for operation in America, Europe,  and Oceania with a fallback to GPRS.


  • Wide Operating Voltage Range 8V to 32V DC
  • Multiple I/Os for Monitoring and Control
  • 1-wire Interface Supports Temperature Sensor
  • GARMIN FMI/Multiple Sensors
  • Gps fleet tracker with Two RS232 Serial Ports for External Accessories
  • Internal 3-axis Accelerometer for Motion Detection
  • Driving Behavior Monitoring and Incident Notification
  • BLE Low Energy 4.0 Support
  • Internal GNSS Antenna and Optional External GNSS Antenna
  • 80 x 48 x 25 mm


GSM Specifications:

Frequency: 850/1800/1900  MHz
Data Transmission: GPRS multi-slot class 33 (33  by  default); EDGE multi-slot class  33 (33  by default)

LTE Specifications:

Operating Band:

Cat M1/Cat NB1: LTE-FDD: B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/ B19/ B20/ B25/ B28

Data transmission:
eMTC (DL) 375 Kbps
eMTC (UL) 375 Kbps
NB1 (DL) 32 Kbps
NB1 (UL) 70 Kbps

GNSS Specifications:

GNSS Type: u-box All-in-one GNSS receiver
Sensitivity: Cold Start: -160 dBM; Tracking: -161 dBM
Position Accuracy (CEP): Autonomous < 2.5m
TTFF (Open Sky): Cold start: 30s average; Hot Start: – 1s average


Digital Inputs: 1 positive trigger input  for ignition detection; 3 negative trigger inputs for normal use
Digital Output: 1 digital  output, open drain, 150 mA  max  drive current
Latched Digital Output: 1 digital output with  internal  latch  circuit, open  drain,  150 mA  max  drive current
Configurable: 1 special 1/0 can  be  configured as an OV-32V analog input  or  an open
Input/Output: Drain  digital  output with  150  mA  max  drive current
Serial Ports: 2 RS232  serial  ports on 16-pin Molex  type connector, for external devices
CAN  Bus  Interface: CAN  2.0NB, SAE ]1939
1-wire  Interface: Support 1-wire  temperature  sensor (maximum 8 channels)
Cellular Antenna: Internal only
GNSS Antenna: Internal patch antenna and optional external  antenna  (SMA  type connector)
Bluetooth  Antenna (Optional): Internal only
LED Indicators: CEL, GNSS,  PWR
Mini USB  Interface: Used  for upgrading and  debugging

General Specifications:

Dimensions: 80mm(L)  x 48mm(W) x 25mm(H)
Weight: 75g
Backup Battery: Li-Polymer, 250  mAh
Operating Voltage: av to 32V  DC
Operating Temperature:
-30″C  ~ +Bo°C
-40°C ~ +85°C for storage
Bluetooth (Optional): Support BLE 4.0 protocol

EGPRS Specifications:

Frequency: EGPRS 850 / 900 / 1800 / 1900 MHz

Data Transmission: GPRS multi-slot class 33 (33 by default); EDGE multi-slot class 33 (33 by default)

Air Interface Protocol:

Transmit Protocol: TCPF UDP, SMS
Scheduled Timing Report:  Report position and  status  based  on  preset time intervals,  distance,  mileage or a combination of these settings
Geo-fences: Geo-fence  alarm,  support up  to 20 circulars and  20  polygon gee-fence regions
Low Power Alarm: Alarm  when the backup battery is low
Power On Report: Report when the device is powered on
Driving Behavior Monitoring: Aggressive driving behavior detection,  e.g.  harsh braking and  acceleration
Crash Detection: Accident data collection  for  reconstruction and  analysis
Tow Alarm: Alarm trigger based on a built-in 3-axis accelerometer
Special Alarm: Special  alarm  based  on  digital inputs
Remote Control: OTA control of digital  outputs

Want to know more?

Download the GV350MG Manual From here.



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.